GEN 2 BMS TRANSMITTERS
GENERATION 2 – BUILDING MANAGEMENT SYSTEM TRANSMITTERS
The Brasch TRNS Generation 2 series gas transmitters are designed to monitor low levels of toxic gases and provide an output signal to conveniently add gas detection capabilities to any new or existing system. Transmitters are available in carbon monoxide (CO) and nitrogen dioxide (NO2) variants. A digital output is provided via Modbus RTU while an analog output is provided via a user selectable 4-20 mA, 0.2-1 VDC, 1-5 VDC, or 2-10 VDC signal. Each output is easy to configure for communication with most BMS, DDCS, or VFD systems. Transmitters can also be used as remote sensors with Brasch GSE Generation 2 dual-zone standalone gas detectors and ventilation controllers.
Carbon Monoxide and Nitrogen Dioxide BMS Gas Transmitter
Fixed industrial gas sensor for monitoring carbon monoxide (CO) and nitrogen dioxide (NO2) and controlling HVAC equipment in conjunction with a BMS or DDCS. Available in Analog (4-20 mA, 0.2-1 VDC, 1-5 VDC, 2-10 VDC) or Digital (Modbus RTU) configuration. Covers up to 9,000 sq. ft.
Carbon Monoxide BMS Gas Transmitter
Fixed industrial gas sensor for monitoring carbon monoxide (CO) and controlling HVAC equipment in conjunction with a BMS or DDCS. Available in Analog (4-20 mA, 0.2-1 VDC, 1-5 VDC, 2-10 VDC) or Digital (Modbus RTU) configuration. Covers up to 9,000 sq. ft.
Nitrogen Dioxide BMS Gas Transmitter
Fixed industrial gas sensor for monitoring nitrogen dioxide (NO2) and controlling HVAC equipment in conjunction with a BMS or DDCS. Available in Analog (4-20 mA, 0.2-1 VDC, 1-5 VDC, 2-10 VDC) or Digital (Modbus RTU) configuration. Covers up to 9,000 sq. ft.
